ELM327 Bluetooth with switch for Ford and Mazda
- Contact Form
1Latest ELM327 version for greater fd compatibility
2Manufactured modification to include a switch to connect to different CAN buses
3Designed for FRScan software
4Compatible with software venders; FORScan, Elmconfig, FF2 and FCCus, plus more
4MS CAN bus and HS CAN bus support
5Drivers and instructions included
One ELM327 OBDII OBD2 USB with switch. Designed for communicating with Ford, Mazda, Lincoln and Mercury vehicles. With this cable and the one of the supported software vendors you can detected modules which are not visible for regular
OBD2 scanners. This includes showing you trouble codes, PIDs, running tests and services procedures which are never displayed by other OBD2 scanners and a standard ELM327.
Reset fault /trouble codes / parameter ids (PIDs)
Change car configuration data
Program certain models
Switch position one: HS CAN – Occupies pins 6 and 14
Switch position two: MS CAN – Occupies pins 3 and 11
Please note that many Ford and Mazda models (approximately since 2003-2004) are equipped with MS CAN bus, in addition to the regular HS CAN bus. In contrast to HS CAN bus, MS CAN bus is not supported by the stock ELM327, because MS CAN
is a manufacturer-specific solution and located on non-OBD2 pins. This ELM327 has been modified to allow it to implement the MS CAN bus.
ELM327 supports HS CAN from the stock, because Ford HS CAN completely matches to the OBD2 standards. It occupies pins 6 and 14. MS CAN bus occupies pins 3 and 11.
All Ford, Mazda, Lincoln, Mercury vehicles that can be addressed using an ELM via an OBDII connector.
FRD HS CAN
FRD MS CAN
Cables fully tested on supported model before shipping.
No responsibility can be accepted for any damage caused by the lead.